Product Overview
Product introduction: As a CAT1 brand product, the system architecture adopts the MCU plug-in module method, 808 protocol, and the system platform is convenient and quick to connect.
In terms of positioning, the 1612 module method is adopted, which supports Beidou + GPS + WIFI + base station quadruple positioning. For projects that require RTD and RTK high-precision positioning, this product can be satisfied by simple rectification.
Built-in system resources such as Bluetooth, voice, call, TTS, MIC, 4 buttons, motors, etc., are convenient for customers to define project functions.
Built-in 1500mAH battery, with the development of CAT1 modules to small size, the battery will be upgraded to 1800mAh in the future without changing the shell mold;
Application field
Smart Sanitation Smart Campus Smart Site
Smart Attendance Smart Pension Smart Scenic Spot
| Categories | Name | Description |
| Chip Solution | Communication network support capabilities | LTE-TDD:B34/B39/B40/B41LTE-FDD:B1/B3/B5/B8GSM:900/1800MHZ |
| Network format | Cat.1 (Telecom, China Mobile, China Unicom) | |
| Location method | Beidou+GPS+WIFI+LBS | |
| Vibration Detection | Support for adaptive work, sleep mode | |
| SIM card holder | Built-in SIM card | |
| Keys | 4 buttons (5K minimum order, buttons can be defined according to customer needs) | |
| Electroacoustic | Speaker | Support |
| Microphone | Support | |
| Vibration Motor | Support | |
| Electrical Characteristics | Built-in battery | About 1500mAh lithium polymer battery |
| Charging interface | TYPE-C charging port | |
| Charger | 5V 1A, with 20cm charging cable | |
| Charging Time | About 3-4 hours (500mA charging) | |
| Battery check | Support | |
| Operating Voltage | 3.7V | |
| Operating Current | <=200mA | |
| Standby Current | <=8mA | |
| Standby Time | >=3 days (no more than 8 hours of exercise per day) | |
| Environmental Properties | Operating Temperature | -20℃～65℃ 1. This product defaults to normal temperature battery, use below 0℃ will shorten the battery life 2. If it is used in northern regions, you need to customize -30℃ low temperature battery |
| Storage temperature | -30℃～80℃ | |
| Operating Humidity | 10%～85%RH, no condensation | |
| Waterproof and dustproof grade | IPX5 (everyday splash and rain protection) | |
| Forms | Host Size | 101×60×11mm |
| Host Weight | about 85g | |
| Wearing | Lance (see case picture above) |
